Hondata

Is there anyone on this that can help diagnose a no start /no datastream condition. The car failed during a circle track race. Currently No spark/fuel pump/datastream. Parts changed so far
1. ECU with matching ingnition switch/key
2 Dash fuse box (on recommendtion from Honda Dealer)
3 Instrument ...

We put the used ecu & key in last night, still a no start. The wierd thing is when we hooked up our scan tool up, the tool froze up. We had disconnect the battery so the tool would reboot. There must
be a short to ground that is killing the data stream. we going to check every wire coming out of the ...

We can overnight the FP so you test it and unlock it if we go with another ecu. We are 30 days from our first race so the heat is on. Its hard for us in Maine we still have snow on the ground and to have faith that spring will come and racing will happen.

Tried another calibration this morning. Sent info.Still have a red x at ecu spot.
Guys please note, This car was running during a race when it failed. Came into the pits and tried to restart, no spark or fpump. Car went into trailer last Oct. Here we are now tring to get it going. Could the problem ...

Went to search for recovery mode and got nothing? Where can I get info on this.

Sent data using help suport

Sorry is the send info on the downloaded flash manager not the web site ?

Just an add on to our issue. We took the car to a honda dealer to have another key made. they assured us that they could deal with the flashpro. well 6hrs later and a$400.00 bill later which they said they cut in half
they ...

Downloaded 4.7. still could not return to stock. download bar went full green but did not take. We our installing a matched used ecu & Ignition switdh/key as a test. Sorry could not find the send info link in flashpro manager

Thanks Mark Violette
1-207-834-2000
business 8-5 est

downloaded 1.4.5, Same thing ECU -red x Try to download back to stock went threw download bar
but did not accept. All fuses and relays are good. What can I Check next, Thanks Guys

Sorry for the delay the race car was outside on the rollback with no availble bay, our shop slammed with work. version 1.3.3.0, Cali SN-FP-SI-US-12702 VIN 2HGFG21586H707073 02/06/2011

DRIVER -GREEN CHECK / FLASHPRO -GREEEN CHECK/ OBD 2 -GREEN CHECK/ ECU RED- X

We are try to down load direct from ...

WE are in a no start condition. 2006 civic si. Using flashpro we cannot get the ECM to return to stock so we can remove it. It downloads from the computer to the flashpro but not from the FP to the ECU. Is their a battery in the FP. When the FP is disconnected from the computer the power light ...

Its looks like we might have to install a new ecm to our 2006 si race car. Will we be able to download programs with our flashpro to the new computer?

How can I get back to server setup screen. Right when I hit email it go to a error sreen that is blank


thanks

At race this weekend we could not raise the rev limiter. we download varous calibrations to get a 8600 rev limit, but on the track we kept hitting it. The data log showed us only hitting 8100 rpms. Could there be a problem with our ecu or vss?
Is it possible to download a 9200 rev limit. This is for ...

Hello

We have purchased a flashpro for our 2006 honda civic si that we are setting up for circle track racing. Is it possible
register and use it without a internet connection, our fab shop is not connected and we do not want to move the car
to start playing with the flashpro.

Thanks Mark