Hondata

it was right on top of the valve cover where the stock harness was grounded almost right in the middle of the valve cover

i solved my problem by moving my wiring harness ground i thought it was grounded fine where it was but apparently not haha i just moved it and it started right up

ok thanks i appreciate the help

where can i buy a brand new iacv for my k20a itr over the internet cant find one at parts store

this might be a stupid question but what will a knock sound like

i have a k20a itr and i am using the itr calibration that came with kpro and i have a knock threshhold of 5v and my knock level at idle is between .1 and .7 and everyonce in awhile itll get to 1.2 for a split second but rarely and while driving its a steady .1 to .2 my question is, is this minor or ...

i have a stock k20a itr and my knock level at idle goes between .1 and .7 when i am driving down the highway normal speed it is a constant .1 and when i rev a little bit at idle it gets as high as 1.2 sometimes is this a knock my thresh hold is at 5v so its not counting them as knocks i am using the ...

i have an itr k20a in a 2000 ls integra and i need a decent tune so that i can drive it somewhere to get it tuned properly i live in the middle of nowhere south dakota haha...
Stock k20a
ktuned header
buddy club spec 2 exhaust
short ram intake
ktuned fuel rail with
stock injectors
91 pump gas ...

well its not really momentarily it stays at 0 untill it goes back down to idle

I finally got everything sorted out on my k20a and I am currently using the itr calibration that comes with kpro and when I let off the gas my inj ms drops to 0 and the a/f ratio shoots up to 29

It is a itr k20a I am using a hybrid racing sub harness that I have already checked and is wired correctly and I am using a rywire engine harness and the grounds are all ok

its in a 2000 integra ls and unfortunately i kinda live in the sticks and i have no way of testing it on a different vehice when i have the ecu plugged in the red light is flashing but the green on isnt if that helps any

37820-PRB-A08
2068-801635

i got my ecu back and i installed kmanager and the drivers no problem i plugged the ecu in and the fuel pump primed and the car started and ran good but kmanager says drivers installed and online ignition off....so i turned the engine off and turned the ignition on with ...