Hondata

Can I drop you a private PM for full email? Dimitri informed me that he droppt another email to the support@hondata.com

Please use the corrected one.

The correct email is: Gaivoronski_dimitri@*****

or please enable the user here in the forum please 👍

Best regards

Jerome

Hi,

FP SN: 21152
Connected VIN: SHHFN2***5017

The customer has already contacted you multiple times through the feedback system regarding this issue but has not received a resolution yet.

The FlashPro was functioning normally before the firmware update. After updating, the device now reports ...

FlashPro License Corruption After Firmware Update

Hello Hondata Support,

The customer has already contacted you multiple times through the feedback system regarding this issue but has not received a resolution yet.

The FlashPro was functioning normally before the firmware update. After updating ...

Hi France,

At the moment it running super lean in closed loop operations.

Closed Loop operations: (low to mid throttle)
If you are using fuel tables, you must add fuel in all cells until the STRIM values are near to zero in all conditions.

Open Loop: (Full throttle)
I recommend to be on lambda 0 ...

Hi all,
the common annoying issue on modified K20Z4 after reflash is, dipping of the rev till engine stall.

> Big question how to fix this?
---------------
Step 1:
Apply air leak test to find all issues and solve it first.
----------------
Step 2:
> check sensors, connectors etc.

- Seals ...

Hi Wal,
yes you must deal in: Throttle flow vs. opening
https://k-tuned.3dcartstores.com/72mm-Drive-By-Wire-Throttle-Body_p_878.html
(direct k-tuned TB guideline download- https://drive.google.com/file/d/141lSSusKHTHyzfFS5jrnDyUBijCOg_8s/view?pli=1 )

To avoid injector shutoff during shifting events ...

He will try it to send the feedback again with connected OBD2 and ignition on.

Spunkster wrote: Thu Apr 08, 2021 11:11 am Feedback was sent with the OBD2 port disconnected.

Of course - the notebook is not be able to be connected to the internet. No WLAN at the garage.
Which solution can you provide to fix this? Customer start to make pressure to fix this problem... Car need to be updated for raceing.

After firmware upgrade the customers flashpro is not be able to upload my new calibrations to the flashpro box to update the ECU map.

WhatsApp Image 2021-04-06 at 8.11.23 PM.jpeg
WhatsApp Image 2021-04-06 at 8.11.14 PM.jpeg
WhatsApp Image 2021-04-06 at 8.11.08 PM.jpeg

Issue was also send via ...

I only tuned the car - not fitted the hardware.

Ok, thanks DaX for the information.

Hi,

i am little bit confused regarding how to find the best IGN advance for the b series engine.

How I can monitor the knock Sensor? K count is not available on the board.

It is required to use a third party knock tool to identify knocking?
I have one customer request for tuning but I have no ...

hybrid calibration? I do not understand .what if I would like to be able to have a suitable calibration for my car I have an invidia exhaust and kyn intake

Sorry need one calibration for my car


use fuel table by select "use speed/density (MAP) fuel tables" and enter the value of map pressure ...

On my Flashpro the firmware update for this beta was successful.