Hondata

I already have one sir for the thermal couplers. And what about the 0-5 volt pressure transducers I have? And the 2 ground wires I have in the little harness what do I ground them to? Also the digital inputs what can they be used for?

So I have a few pressure transducers id like to use and a egt converter to convert the weak voltage from the egts to a 0-5 volt reading any special thing I need to do?

One more question sir as far as checking ignition timing just hook up the timing light lead to the coil connector?

Thank you sir.

https://www.diyautotune.com/product/ign-1a-race-coil/

Does are the coils. And well you guys pull the wire out of the ecu and replace it with the the one going to the cpr box what would the icm be doing at the point inside the distributor?

I have 4 agn coils I'm wondering if I require the connector of the cpr kit will work fine with them vs the oem coils. Also the only things needed inside the distributor are the mag pick ups right the icm can be pulled out completely correct?

Would the cpr kit be good enough to control agn-1 coils or they are basically the aem smart coils.

I have a s300 v3 in a p28 ecu in a obd1 civic SI with a h22 im having an issue with getting the ecu to activate the nitrous out put side. Yes I did enable the nitrous/ax1 and the other 2 also and changed the activation and the out put pin and nothing. Is there something I'm missing or do I need to ...