Hondata

naw not boosting yet. just running the plain base map. I was trying to figure out if it was the base map or an engine problem that is making it run lean. but sounds like it's an engine problem.it's a new motor and swaps usually have some bugs. time to go back and check the timing again ect.

Thanks ...

hi,
was wondering if someone could tell me what the base p28 calabration a/f ratio is at wot and idle?
my a/f at idle is around 20:1 . at wot it is 14.9:1 until 4000rpm then it's in the low 13's. this seems lean to me, but I just want to check to make sure the base map isn't suppossed to run this ...

my car doesn't have an eld. it's a 99cx. so I have the wideband connected to the eld pinout on the ecu.I haven't had anytime to play with this over the last month, but will have a little time over xmas to play around with it. I'm not givin up yet :D
Thanks guys,

B

hi,
thanks for the suggestion, I gave it a go but no luck. I'm gona try and program the lc-1 to have the same output voltages as the lm-1 then just select it lm-1 from the drop down menu and see if that will work. if not I'll go through all my wiriring again
Thanks,
B

hi,
I'm trying to get my lc-1 wideband to work with my s300 on the eld port.I setup custom in the o2 settings with 0v= 7.35 a/f and 5v=22.39 a/f .I have selected eld in the o2 settings.
I have the brown wire analog2 (0-5v) from my lc-1 going to D10 on my p28. I've tried both eld disabled and ...