Search found 12 matches

by lutzer11
Wed Sep 25, 2024 5:36 pm
Forum: K-Pro / KManager
Topic: K-Pro Solid Red led and “Cut”
Replies: 6
Views: 5275

Re: K-Pro Solid Red led and “Cut”

Final post for this cause problem is solved. Loose Valve cover ground. It acted tight cause it was wedge into the powder coat of the cover. So poor ground connection. Tighten it and All problem are gone.
by lutzer11
Tue Sep 24, 2024 6:30 pm
Forum: K-Pro / KManager
Topic: K-Pro Solid Red led and “Cut”
Replies: 6
Views: 5275

Re: K-Pro Solid Red led and “Cut”

so don't think this s a hondata issue anymore. Looks like its leaning more towards a power issue. ELD, Alternator, or maybe grounding. Not to sure yet. Did a couple pulls today and what was made to be my last pull, the main relay decided to start chattering. Causes of relay chatter, Bad relay, lack ...
by lutzer11
Wed Sep 18, 2024 2:46 pm
Forum: K-Pro / KManager
Topic: K-Pro Solid Red led and “Cut”
Replies: 6
Views: 5275

Re: K-Pro Solid Red led and “Cut”

I guess I should also state the issue was happening throughout the datalogs randomly. Hard to datalog and lock exact pin point spot while being one person. So sorry if thats alot to look over.
by lutzer11
Wed Sep 18, 2024 2:44 pm
Forum: K-Pro / KManager
Topic: K-Pro Solid Red led and “Cut”
Replies: 6
Views: 5275

Re: K-Pro Solid Red led and “Cut”


Post the calibration and a datalog showing the issue.


Here is the Tune and Data log. The one log where VSS completely dropped out was a first Also tune is not a dialed in tune Issue started happening before we could do a full tune on it. Logs also sent to Tuner to look over as well

Ralph.kal ...
by lutzer11
Tue Sep 17, 2024 5:31 pm
Forum: K-Pro / KManager
Topic: K-Pro Solid Red led and “Cut”
Replies: 6
Views: 5275

Re: K-Pro Solid Red led and “Cut”

I’ll get my laptop charged tonight to try and get you one tomorrow. After work sometime.
by lutzer11
Tue Sep 17, 2024 4:16 pm
Forum: K-Pro / KManager
Topic: K-Pro Solid Red led and “Cut”
Replies: 6
Views: 5275

K-Pro Solid Red led and “Cut”

2002 rsx type s
Type s Ecu with kpro v4 (white board)

Recently had a problem develope after engine bay clean up and upgrades. For example an electric power steering. Tucked ac kit. Motor mounts. Intake.

Issue

During normal driving and light throttle (up to like 5k rpm) cars fine happy dandy. If ...
by lutzer11
Fri Aug 21, 2020 6:14 pm
Forum: s300 / SManager
Topic: Duty drop out during pull
Replies: 8
Views: 21349

Re: Duty drop out during pull

Spunkster wrote: Fri Aug 21, 2020 9:07 am Is it dropping the same amount of boost in the same areas?
The guy I’ve been doing the tune see it drop with the drop of duty. Just talking to him now.
by lutzer11
Fri Aug 21, 2020 12:59 pm
Forum: s300 / SManager
Topic: Duty drop out during pull
Replies: 8
Views: 21349

Re: Duty drop out during pull


Is it dropping the same amount of boost in the same areas?


I haven’t looked yet to see what happens with the boost. It has happened to where it get stuck in a loop at the 4500ish point, where it’s acting almost like a rolling anti lag. Idk if I stated that yet. Also have been in the higher rpm ...
by lutzer11
Thu Aug 20, 2020 4:39 pm
Forum: s300 / SManager
Topic: Duty drop out during pull
Replies: 8
Views: 21349

Re: Duty drop out during pull

Installed a stock map sensor, and went for a drive, after changing the setting in the s300 of course, still doing the same thing.
by lutzer11
Thu Aug 20, 2020 9:57 am
Forum: s300 / SManager
Topic: Duty drop out during pull
Replies: 8
Views: 21349

Re: Duty drop out during pull



To me nothing looks off in your tune. Have you tried disabling launch control and seeing if that changes anything?

What is the specific part number of the spark plugs you are using? If you are not using a resistor type spark plug, it can cause radio interference that will make the car not run ...
by lutzer11
Thu Aug 20, 2020 9:56 am
Forum: s300 / SManager
Topic: Duty drop out during pull
Replies: 8
Views: 21349

Re: Duty drop out during pull


To me nothing looks off in your tune. Have you tried disabling launch control and seeing if that changes anything?

What is the specific part number of the spark plugs you are using? If you are not using a resistor type spark plug, it can cause radio interference that will make the car not run ...
by lutzer11
Wed Aug 19, 2020 9:28 pm
Forum: s300 / SManager
Topic: Duty drop out during pull
Replies: 8
Views: 21349

Duty drop out during pull

94 ls integra
b18b1
gsr lsd trans
1000cc grams
320 lph aem fuel pump
aem fuel rail
stock dizzy
ngk 9s spark plugs
56 trim garrett turbo 16-18lbs
hondata s300 v1

Running into an issue lately when ive been working on a tune with my integra Well be taking some pulls everything working fine, then ill ...