Hondata

I have a Hondata P28 for a 2001 integra GSR. The numbers on the side are: P28-OBD2B H273013 H0BDIIB with pins. Do I dissable the injector error or not?

OK, thanks for the info. I don't want to melt anything because the car is my daily driver.

I tapped in to the harness in pin A30 (ELD) on a 2001 integra is the green and red wire. I have a Hondata P28 OBD2B that eliminates the need of adapter harness. It works very good, I just have to figure out the offset voltage to get the gauge to read same as the ecu.

How much boost are you getting with this settings? The fuel enrichment setting, is this in %? You said 350 units with 750cc injectors, I have 1000cc RC injectors. Should I just type 350 in the fuel enrichment box and -60 degs in the ignition box? Is this safe? Do you have the same set up I have in ...

The numbers on the side are: P28-OBD2B H273013 H0BDIIB with pins.

Yes, I want 3 to 5 psi. My car has a large turbo.

Hey I forgot, How much lower should the Activation RPM be from the Limiter RPM setting?100, 200, or 300 RPM?

Ok thanks. I'll try that.

I want to take my car to the track on street tires. I know that street tires are no good for drag racing, but I still have the stock axles. I will like to try my luck with the launch control, so i don't have to look at the tachometer wile I'm trying to get a good reaction time. I'm thinking of ...

Thanks for the help. :D

Ok, I have a Hondata P28 for a 2001 GSR. Does the Hondata P28 has the injector error hardware? Do I disable it or or not??? :?: :?:

Ok, thanks. But, do I have to removed the R136 and R138 resistors on a Hondata P28? :?:

Hey is me again, I had the AEM wide band connected to the factory O2 input and like I read before it does not work, the ECU went crazy during close loop operation. I'm re-installing the factory narrow band O2 back in the car. My car is a 2001 GSR, but I'm using a Hondata P28 that eliminates the need ...

I have RC 1000cc injectors with a prelude resistor box.

was going to use one of the stock fuel compensation tables but the guy that tuned my car told my that in other words adding +10% of fuel on 240cc injectors is not the same as +10% fuel for 1000cc injectors. Is this true? The stock tables add up to 39% fuel when the engine is cold and that sounds ...