13' Civic Si. Running Reflash. Tune help.
13' Civic Si. Running Reflash. Tune help.
Received my flash pro today and went ahead and used the US CIVIC SI 2012-2014, Hondata Reflash base calibration from the drop down menu. The "first data log" is from the base tune. The other data log is also from the base tune. I decided to tweak the base tune based off a few parameter changes. Wanted to have someone review that "edited reflash" base tune because i am wanting to use it as a starting point to begin tuning my vehicle. From the data logs it looks that my ecu is pulling too much timing. I will be pulling data logs during the week. Currently only running a cat delete 3" exhaust and a 3" cat back exhaust. Data logs are not from the calibration provided but were captured with the base tune stated at the begging of the post.
You do not have the required permissions to view the files attached to this post.
Re: 13' Civic Si. Running Reflash. Tune help.
When tuning fuel, do I start with the 0 degree timing and then move to the next degree mark? Or do you leave 0 degree alone? Going to be running my modified calibration when I get home and begin tuning that file. It’s the one attached to the post prior. Also would 0 degree mostly be my idle and decal?