Pepper 8th gen si

[hondamanf22]

Pepperk20z3.fpcal

Well....
I've been avoiding trying to ask for help. I really tried to do as much as I could on my own without having someone else step in. I would still like to get suggestion rather than having someone else just make changes and giving me the fix. I can't really afford to get a tune from a pro because im responsibly broke. Any tips or hints to look at are certain table would be most appreciated.

Current mod list
SPNM FD2 6SPD TRANS
SIRI MOTO BIGBORE KIT THROTTLE BODY
RBC INTAKE/STOCK
STOCK INJECTORSS
SKUNK ALPHA HEADER
SKUNK2 MEGA RR EXHAUST
SKUNK2 COLD AIR

I have included drive home from work like so it had some heat into and include a pull from 3rd in a nice straight line I made separately

Also the guy who sold it to me a few years ago put a flex pipe on the header that now has a small leak from the wire mesh kinda give out and has a small leak and not sure if would cause an issue with AFR. its a bit past the where the test pipe section would be but had that welded in place(past the primary 02 and before the secondary 02. I would of kept as it was originally but will at some point get that fixed as it now just become an issue in the last few months.

Thanks in advance

[hondamanf22]

hopefully you can see the calibration this time

[CalibratEd]

Are you having specific issues or do you need an overall health check of how the car is running?

-Ed

[hondamanf22]

Really a health check. I’m really green to this and still trying to learn. If there is an area that I fudged up I would like to know. I have adhd and sometimes word comprehension will go over my head (Being real) I’ve read through some of the thread and seen people get redirected to a portion of the help section regarding the topic. I’ll read it but I don’t understand end up having more questions.

I’ve gotten this far but would appreciate an help or info. Again thanks for any help or support given.

[hondamanf22]

Pepperk20z3.fpcalWell....
I've been avoiding trying to ask for help. I really tried to do as much as I could on my own without having someone else step in. I would still like to get suggestion rather than having someone else just make changes and giving me the fix. I can't really afford to get a tune from a pro because im responsibly broke. Any tips or hints to look at are certain table would be most appreciated.

Current mod list
SPNM FD2 6SPD TRANS
SIRI MOTO BIGBORE KIT THROTTLE BODY
RBC INTAKE/STOCK
STOCK INJECTORSS
SKUNK ALPHA HEADER
SKUNK2 MEGA RR EXHAUST
SKUNK2 COLD AIR
93 octane
I have included drive home from work like so it had some heat into and include a pull from 3rd in a nice straight line I made separately

Also the guy who sold it to me a few years ago put a flex pipe on the header that now has a small leak from the wire mesh kinda give out and has a small leak and not sure if would cause an issue with AFR. its a bit past the where the test pipe section would be but had that welded in place(past the primary 02 and before the secondary 02. I would of kept as it was originally but will at some point get that fixed as it now just become an issue in the last few months.

Thanks in advance