need b20z 60-1 rc550 map please

ef8904 · Post by **ef8904** » Wed Feb 26, 2014 11:38 am

stock 00 crv ex bottem
96 integra ls head
turbonetics 60-1
log manifold
walbro 255
rc550
stock fpr
aem fuel rail

any help would be greatley appreciated, cant seem to find a stock b20 turbo map

throwdown · Post by **throwdown** » Thu Feb 27, 2014 8:09 am

I can give you a base map but it would only be to start the car and drive it to be tuned...I don't recommend any WOT pulls just lmk

ef8904 · Post by **ef8904** » Thu Feb 27, 2014 11:22 am

hey i apprectiate the help. here are my datalogs and the map i guess from what i started with. b20 stock map created boost tables then added 20 % fuel in column 7 and 10

throwdown · Post by **throwdown** » Fri Feb 28, 2014 8:20 am

I would take it straight to your local tuner

keto06 · Post by **keto06** » Fri Feb 28, 2014 4:29 pm

I actually just tuned a B20 Turbo on the dyno yesterday. I will post the map when i get home.

keto06 · Post by **keto06** » Sat Mar 01, 2014 11:38 am

He made like 236/219 @ 9lbs on a Mustang Dyno.

We kept the map fairly conservative and its tuned for a daily driver on 93 octane.

AFRS are around 11.3-11.5 across the board in boost.

ef8904 · Post by **ef8904** » Sat Mar 01, 2014 3:37 pm

Thanks for the quicl reply, ill flash my ecu and update later tonight. Can't wait!

ef8904 · Post by **ef8904** » Sat Mar 01, 2014 5:42 pm

Anything I should do aside from relearning TPS, turned wideband input on ELD and timing at 16? RC injector dead times? Should I tun open or closed loop?

ef8904 · Post by **ef8904** » Sun Mar 02, 2014 4:04 pm

Worked out well! Switched to a colder plug and runs great WOT. Which turbo was it running?

keto06 · Post by **keto06** » Sun Mar 02, 2014 4:25 pm

Awesome.

Always open loop.

6s or 7s? This was tuned on 6s. Forgot to mention that.

If you hookup the wideband, post a log. Id like to see it.

It was running a GT35.

ef8904 · Post by **ef8904** » Mon Mar 03, 2014 1:57 pm

i went with 7s. i believe my WG has a 7lb spring as well. Was that a low or high compression b20? does it have headstuds? ill drive the car tonight and do my best to log it. thanks again for the help, car is a blast to drive now!

keto06 · Post by **keto06** » Mon Mar 03, 2014 2:21 pm

7s should work, though I think youd be fine with 6s.

I believe its a completely stock B20 out of a CRV. They might have put in headstuds but I dont think so. Stock intake mani, log style turbo mani. Very simple build overall but he likes it.

Should be fine running 7lbs.

keto06 · Post by **keto06** » Tue Mar 04, 2014 2:48 pm

Datalog?

ef8904 · Post by **ef8904** » Wed Mar 05, 2014 6:24 am

here ya go. sorry it took so long, i only have a computer with net at work. hopefully this worked properly

ef8904 · Post by **ef8904** » Wed Mar 05, 2014 10:26 am

actually after reviewing my own log that is probably no help. ill try again tonight and find an open road to pull in 4th

Hondata

need b20z 60-1 rc550 map please

need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please

Re: need b20z 60-1 rc550 map please