Page 1 of 1

Weird Cel problem

Posted: Sun May 16, 2004 4:03 pm
by b18flip
Recently I've been experiencing some odd issues with my setup. It's been on and tuned for about 1.5 months now, and recently it's been giving me a Cel but the light won't blink when i jump the harness. The idle tends to bounce around, won't rev passed 3.5k i believe, and runs like crap. I checked to make sure all the connections/soldering was ok on the ecu and obd1-obd2 harness. I also tried idling the car with the stock obd2 p72 and it only gives me a cel 65 (secondary o2 header) which expected since it's not installed.

Setup: 01 GSR, basic turbo kit, hondata s200b, p72, ob2-1 harness from honda-tech member "blown90hatch"

Re: Weird Cel problem

Posted: Mon May 17, 2004 8:01 am
by turbosi92
b18flip wrote:Recently I've been experiencing some odd issues with my setup. It's been on and tuned for about 1.5 months now, and recently it's been giving me a Cel but the light won't blink when i jump the harness. The idle tends to bounce around, won't rev passed 3.5k i believe, and runs like crap. I checked to make sure all the connections/soldering was ok on the ecu and obd1-obd2 harness. I also tried idling the car with the stock obd2 p72 and it only gives me a cel 65 (secondary o2 header) which expected since it's not installed.

Setup: 01 GSR, basic turbo kit, hondata s200b, p72, ob2-1 harness from honda-tech member "blown90hatch"
Flip,
what map sensor are you using?

Posted: Mon May 17, 2004 9:05 am
by b18flip
i'm still using the stock map sensor

Posted: Mon May 17, 2004 2:01 pm
by turbosi92
b18flip wrote:i'm still using the stock map sensor
What PSI you running? I would get this everyonce in a while and I know it is the map sensor as I was boosting to much on the stock sensor. I was pushing it to the limits. It would throw a solid CEL and go away after a minute sometimes. I narrowed it down to that.