Hondata

Hi all,

I have a race car with a DC5 Integra Engine and ECU.
I want to fit a proper race dash so I can get rid of all the guages and datalog etc.
Problem is none of the Dash manufacturers support the Jap spec ECU "PRC"
Question is could I just get a "PRB" ecu from a EP3 Civic (they all seem to support this model ecu) and load my current map onto it!?
I know the fuel pump is wired slightly different but that is easy changed, I'm not currently running a Lambda.

Cheers

Keith

The ECU has nothing to do with it, as long as you have a version 4 K-Pro.

Details on supported dashes can be found below:
http://www.hondata.com/help/kmanager/mo ... htsub=dash
http://www.hondata.com/help/kmanager/ai ... htsub=dash
http://www.hondata.com/help/kmanager/ra ... htsub=dash
http://www.hondata.com/help/kmanager/di ... ub=digital

Ah ok thanks,
with version 3 it matters tho!!

Cool ill prob just upgrade to version 4 K-Pro
Will I have to get the K-Pro 4 remapped or can I load my original map onto it.
Don't know if maps are intechangable from different versions K-Pro

You can use your existing calibration with the new K-Pro.

Excellent

Thanks for your Help

Keith

Will the AIM/Hondata adaptor module work with the "PRC" ecu!?
Would be alot cheaper option than upgrading to Kpro4
I have v3

You could use that, but the details are no longer n the help file.

I have found old threads showing what settings etc.
And aim have the wiring diagram.
Main thing is it will work with the JAP PRC ecu

It is dependent on the calibration used I believe, not the actual ECU.

Ah ok, I'll check that altho I think the calibration used us prc

There are no PRC calibrations, only PRB, PNF, and PND.

Oh right ok. I'll check tomorrow
Thanks

Might be a stupid question but how do I check what calibration is on my ecu!?

It's ok I found it.
Found it in the notes.
It's a PRB calibration type