Page 1 of 1

overron manifold pressure

Posted: Tue Jan 31, 2023 6:52 pm
by GAOHONGXIN
What adjustments will be made to the data in this table? Because I now have an RDX injector, a very light flywheel, a ZDX throttle, a shunk2 manifold, and I don't know exactly why, but when I go back into neutral as I'm driving, the Revs will drop below the target revs, and then surge, in the return to normal speed, the injector restart time has also been modified, and now found that a simple adjustment of the excess intake pressure for this idle speed has a good effect

Re: overron manifold pressure

Posted: Wed Feb 01, 2023 9:55 am
by Spunkster
Have you tried putting the stock throttle body back on?

Please see: http://www.hondata.com/forum/viewtopic.php?t=18527

Re: overron manifold pressure

Posted: Thu Feb 02, 2023 12:45 am
by GAOHONGXIN
Spunkster wrote: Wed Feb 01, 2023 9:55 am Have you tried putting the stock throttle body back on?

Please see: http://www.hondata.com/forum/viewtopic.php?t=18527
My throttle body motor has been changed back to the original car, and I also borrowed the throttle that will not have this problem in my friend's car, but it is still the same.
But my friend's car hasn't changed as much as mine. He doesn't have a lightweight flywheel, an enlarged fuel nozzle, or a high-angle camshaft