Page 1 of 2
CVT Temp
Posted: Tue Jun 23, 2026 8:12 pm
by scofield
Does FlashPro support displaying CVT fluid temperature?
Re: CVT Temp
Posted: Wed Jun 24, 2026 9:24 am
by scofield
Spunkster wrote: Wed Jun 24, 2026 9:16 am
No, it does not.
I saw on the forum that it works fine in version 4.4.7, but it's broken in 4.7.2. Is this a known bug in the latest release ?
viewtopic.php?p=141096&hilit=CVT+TEMP#p141096
Re: CVT Temp
Posted: Wed Jun 24, 2026 9:45 am
by Hondata
It works in 4.7.2
Re: CVT Temp
Posted: Wed Jun 24, 2026 8:08 pm
by scofield
Hondata wrote: Wed Jun 24, 2026 9:45 am
It works in 4.7.2
retry in my flashpro 4.7.2 still not work , could you help to carify it . thanks~
Re: CVT Temp
Posted: Mon Jun 29, 2026 8:18 am
by scofield
is any update for this ?
Re: CVT Temp
Posted: Sun Aug 02, 2026 3:42 pm
by scofield
Is it possible to support this feature?
Re: CVT Temp
Posted: Mon Aug 03, 2026 9:46 am
by Hondata
Sorry, it was fixed in 4.7.3 early July and should be working in 4.7.3 and subsequent releases.
Re: CVT Temp
Posted: Wed Aug 19, 2026 2:52 am
by scofield
Hondata wrote: Mon Aug 03, 2026 9:46 am
Sorry, it was fixed in 4.7.3 early July and should be working in 4.7.3 and subsequent releases.
Thanks Hondata. After updating to v4.7.6, I am now able to monitor the CVT temperature successfully!
Re: CVT Temp
Posted: Tue Sep 01, 2026 11:46 pm
by scofield
After testing for a few days, I found the issue. The values monitored on the mobile app appear normal, but when I load the datalog from the FlashPro unit to my PC, the CVT temp always shows 0
2026-09-02 144307.gif
Re: CVT Temp
Posted: Thu Sep 03, 2026 4:25 pm
by Spunkster
Were these datalogs made with older software?
Re: CVT Temp
Posted: Thu Sep 03, 2026 8:13 pm
by scofield
Spunkster wrote: Thu Sep 03, 2026 4:25 pm
Were these datalogs made with older software?
software version is 4.7.6
and also can't see the Torque in log
2026-09-04 111405.gif
Re: CVT Temp
Posted: Fri Sep 18, 2026 10:55 am
by scofield
scofield wrote: Thu Sep 03, 2026 8:13 pm
Spunkster wrote: Thu Sep 03, 2026 4:25 pm
Were these datalogs made with older software?
software version is 4.7.6
and also can't see the Torque in log
2026-09-04 111405.gif
after update software to version is 4.7.7 sill can't see CVT Temp and Torque in log ....
Re: CVT Temp
Posted: Fri Sep 18, 2026 12:01 pm
by Spunkster
are these new datalogs made with the new software or old datalogs?
Re: CVT Temp
Posted: Mon Sep 21, 2026 9:12 am
by scofield
Spunkster wrote: Fri Sep 18, 2026 12:01 pm
are these new datalogs made with the new software or old datalogs?
old log w/new sofftware-->can't see CVT Temp and Torque
new log w/new software --->can see CVT temp , can't see Torque
Re: CVT Temp
Posted: Tue Sep 22, 2026 6:49 pm
by scofield
scofield wrote: Mon Sep 21, 2026 9:12 am
Spunkster wrote: Fri Sep 18, 2026 12:01 pm
are these new datalogs made with the new software or old datalogs?
old log w/new sofftware-->can't see CVT Temp and Torque
new log w/new software --->can see CVT temp , can't see Torque
update:
After reviewing the new log with the new software (v4.7.7), the CVT temperature value appears unstable and randomly drops out/fails to display.