Page 1 of 1
Andee_FG4 Base tune help
Posted: Wed Jul 15, 2026 3:41 pm
by Andeefg4
Here is my data logs from the hondata reflash , any help is greatly appreciated.
Re: Andee_FG4 Base tune help
Posted: Mon Aug 17, 2026 6:48 pm
by CalibratEd
Post the file you are running.
-Ed
Re: Andee_FG4 Base tune help
Posted: Tue Aug 18, 2026 4:36 pm
by Andeefg4
current reflash tune im running, thanks.
Re: Andee_FG4 Base tune help
Posted: Sun Aug 23, 2026 9:08 am
by Andeefg4
Current mods are just k&n drop in filter and yonaka catback and 62a hasport rear mm. Planning on throwing dc sport intake and a highflow cat header on .
Re: Andee_FG4 Base tune help
Posted: Wed Sep 02, 2026 2:51 pm
by Andeefg4
UPDATE : this is a log after work today , in this log i have a yonaka catback, dc sport intake, 62a hasport rear mount. Today was pretty hot out also. same reflash map as before.
Re: Andee_FG4 Base tune help
Posted: Wed Sep 02, 2026 4:10 pm
by CalibratEd
The car has a few counts of knock and is running lean in the upper RPMs and rich in the upper RPMs when it engages VTEC. After the intake change you should switch to a speed density tune.
-Ed