|
Change History
V2.8.7 (29 Jun 2024)
| • | [S300 V3] Firmware version 22 |
| • | [S300 V3] Improved onboard datalogging |
| • | [S300 V3] Improved onboard calibration storage |
V2.8.6 (17 Apr 2024)
| • | Improved offline behavior |
V2.8.5 (5 Jan 2023)
| • | [S300 V3] Firmware version 21 |
| • | Fixed analog input values with conversions |
| • | Fixed datalog with analog inputs downloading as double length |
| • | [S300 V3] Firmware version 20 |
| • | Datalog file size reduced |
| • | Bluetooth operation improved |
V2.8.3 (27 June 2023)
| • | [S300 V3] Firmware version 17 |
| • | [S300 V3] Fixed on board datalog length |
V2.8.2 (27 April 2023)
| • | [S300 V3] Firmware version 16 |
V2.8.1 (16 Dec 2022)
| • | [S300 V3] Firmware version 14 |
V2.8.0 (25 Mar 2022)
| • | Added support for 'Windows on ARM' |
V2.7.9 (1 Feb 2022)
| • | Better support for screens using scaling of more than 100% (4k monitors) |
V2.7.8 (10 Jan 2022)
| • | [S300 V3] Firmware version 13 |
| • | Added support for S300 types. |
| • | Fixed problem when no internet available |
V2.7.7 (16 Jun 2021)
| • | [S300 V3] Firmware version 12 |
| • | Fixed ethanol percentage reading too high. |
| • | Fixed tuning via Bluetooth not connecting. |
| • | [S300 V3] Fixed CAN output not reaching 100 Hz |
V2.7.6 (11 Mar 2021)
| • | [S300 V3] Firmware version 11 |
| • | [S300 V3] Fixed CAN output packet nitrous2 flag |
| • | S300 password reset now sends a reset code to the owner email or phone number |
V2.7.5 (25 Feb 2020)
| • | Fixed sensors not recording if another datalog was open |
| • | Improved datalog scroll speed |
| • | Added help menu link to Hondata Support Forum |
| • | Fixed problem where table sensor overlay conditions were not correctly applied. |
| • | Fixed problem where TPS trip in min/max speed would not save. |
| • | Added 'distributor error' sensor |
V2.7.3 (10 Jul 2019)
| • | Added button to create default graph templates. |
| • | Fixed closed loop long term trim value labels being switched. |
| • | Fixed field names not showing for owners details |
V2.7.2 (4 Apr 2019)
| • | Fixed exception on Windows 7 when font scaling was not 100% |
| • | Fixed empty setting combo boxes |
| • | Fixed exception when datalogging |
V2.6.8 (26 Mar 2019)
| • | Fixed closed loop minimum temperature tables not saving. |
| • | Added tabbed datalogs to the graph window |
| • | Fixed analog input outputting domain errors with negative voltage offset |
V2.6.7 (23 Aug 2018)
| • | Changed ECT disable so it will use the default ECT value upon ECU power up. |
V2.6.6 (7 Nov 2017)
| • | Improved binary download from s300v1 |
V2.6.5 (28 Sep 2017)
| • | Fixed Flex Fuel fuel compensation. |
V2.6.4 (26 Sep 2017)
| • | Fixed iOS BT datalogging. |
V2.6.3 (25 Sep 2017)
| • | Fixed old datalog PWM value not showing. |
V2.6.2 (22 Sep 2017)
| • | Added scalar and offset for 7 bar MAP sensor. |
| • | Fixed MIL flashing when error codes are present. |
| • | Fixed SCS input not being ignored when SCS used for shift limiter or high/low boost control. |
| • | Fixed pointer size changing for display bar graph. |
V2.6.1 (19 Sep 2017)
| • | Fixed column tracing error when using lambda overlay when datalogging. |
V2.6.0 (1 Sep 2017)
| • | [S300 V3] Firmware version 9 |
| • | Added AEM 30-0310 and AEM 30-4100 wideband support to analog inputs. |
| • | Changed ethanol % so that SManager shows ethanol content when using an analog input for ethanol content. |
| • | [S300 V3] Added ethanol % to Bluetooth. |
| • | Expanded ethanol compensation tables from 4 columns to 6 columns, added open and closed loop compensation tables for fuel and ignition. |
| • | Show error codes on the MIL with key on engine off, without requiring the service connector switch to be jumpered. |
| • | Added separate boost cuts for low and high boost levels. |
V2.5.6 (1 Aug 2017)
| • | Added language translation with Spanish translation. |
V2.5.5 (10 Jan 2017)
| • | [S300 V3] Firmware version 8 |
| • | [S300 V3] Added lambda equivalence ratio to CAN packet 0x664 |
| • | Added closed loop operation delay. |
V2.5.4 (27 June 2016)
| • | Fixed secondary injector dead times not saving. |
V2.5.3 (24 May 2016)
| • | Fixed staged injection parameters not saving. |
V2.5.2 (4 Jan 2016)
| • | Added staged injection parameters |
V2.5.1 (15 Oct 2015)
| • | Added load based minimum water temperature compensation table |
| • | Moved fuel injector settings to new tab. |
V2.5.0 (14 Sept 2015)
| • | [S300 V3] Firmware version 7 |
| • | [s300 V2/s300 V3] Added analog input conversion for the Delphi 12160855 / AEM 30-2012 fluid temperature sensor. |
| • | [s300 V3] Fixed problem where analog inputs would not datalog after upload. |
| • | [Traction Control] Firmware version 12 |
V2.4.4 (20 July 2015)
| • | USB drivers updated to v1.0.3 (Microsoft Hardware Certified) |
| • | [S300 V3] Firmware version 5 |
| • | [S300 V3] Added digital input ethanol content and fuel temperature to datalogging. |
| • | [S300 V3] Increased number of advanced protection inputs from 2 to 4 |
| • | Added minimum speed to full throttle shift. |
| • | Fixed digital input unit changing when datalogging. |
| • | Added injector voltage compensation (dead time) quick select. |
| • | Added closed loop minimum temperature. |
| • | Fixed ECT fuel compensation not working in open loop at times |
V2.3.7 (20 Feb 2015)
V2.3.6 (10 Feb 2015)
| • | Fixed screen scaling for DPI scaling over 150% |
V2.3.5 (9 Jan 2015)
| • | Added option to auto size the table grid. |
| • | Removed requirement to plug in the Traction Control before the Traction Control window is shown. |
V2.3.3 (14 May 2014)
| • | [S300 V3] Fixed flashing red light upon power on. |
V2.3.2 (18 April 2014)
| • | [S300 V3] Fixed analog input on board datalogging |
V2.3.1 (15 April 2014)
| • | [S300 V2] Fixed calibration download |
V2.3.0 (14 Mar 2014)
| • | Added support for the S300 V3. |
| • | [S300 V3] Added Flex Fuel direct sensor digital input. |
V2.2.8 (2 Oct 2013)
| • | Updated USB drivers (Microsoft Windows Hardware Compatibility 2.8.28.0) |
| • | Added calibration revision number. |
| • | Removed traction control minimum speed parameter (this should be set in the traction control window) |
| • | Disable lean protection when traction control is active. |
| • | [Traction Control] Firmware 7 |
| • | [Traction Control] Fixed vehicle speed determination method not showing correctly after update. |
| • | [Traction Control] Prompt to write unsaved Traction Control configuration changes when application closed. |
V2.2.5 (27 Mar 2013)
| • | Fixed problem with wideband target lambda. |
| • | Fixed closed loop max rpm not saving. |
| • | Added rev limiter by gear. |
| • | Added shift light by gear. |
V2.2.4 (8 Feb 2013)
| • | Read MAP sensor even when engine is not running. |
| • | [Traction Control] Firmware 6 |
| • | [Traction Control] Don't start datalogging if the Traction Control is switched off (allows for burnouts). |
V2.1.5 (21 Sep 2012)
| • | Improved Hondata Vault behaviour when searching and downloading files. |
V2.1.4 (18 Sep 2012)
| • | Require registration before Traction Control can be used. |
V2.1.3 (30 Aug 2012)
| • | Added additional inputs for traction control. |
V2.1.2 (8 Aug 2012)
| • | Added tool tip window to lambda and fuel overlay. |
V2.1.1 (9 May 2012)
| • | Added a test upload function under Online->Test Upload for performing a test upload in newly installed S300 v2's without having to register them. |
| • | Changed Check For Updates to show current version number and release dates for both beta and production releases. |
| • | Changed the error report so that the user is notified if an issue has been fixed. |
V2.0.0 (31 Jan 2012)
V1.6.0 (1 November 2011)
| • | Improved datalogging/recording performance when display window is maximized. |
| • | Fixed tabs in the settings window. |
| • | Added automatic conversions to sensor display minimum and maximums, and also sensor warning minimums and maximums. |
| • | Added functionality to saving window position for multiple monitors. |
| • | Included security check to prevent saving data to Program Files to avoid virtualization problems with Windows. |
| • | Added Import/Export feature to the Sensor Settings form, the Graph Template form, and main Settings form. |
| • | Fixed bug where exception is thrown when sensor display min and max are the same value. |
| • | Added speed correction to the Parameters form under Misc. |
| • | Added a driver check entry to the status bar, a balloon hint to install the driver, and an entry in the general settings window to disable the balloon hint. |
| • | Added 2D graphs to the small tables in the Parameters form. |
| • | Fixed problem where lean protection activates when using launch control. |
| • | Added a form to change and create shortcuts. |
V1.5.4 (13 June 2011)
V1.5.3 (11 May 2011)
| • | Added datalog trim functions. |
V1.5.0 (17 January 2011)
| • | When multiple copies of SManager are run display a warning and disable concurrent access to the S300. |
| • | Added value base color for Parameter tables. |
V1.4.8 (30 July 2010)
V1.4.7 (16 April 2010)
| • | Added an option to check for beta version updates. |
| • | Correct pressure display psi unit. (Pressure values shown in psi were incorrectly calculated high by approximately 1.2%. Existing calibrations may show corrected values ~1.2% lower, but the underlying pressure values are unchanged, and the calibration will run identically.) |
| • | Fixed problem which would occasionally reset ECU depending on parameter options. |
| • | Fixed problem where boost control duty would stay at 0% after gear shift. |
V1.4.5 (8 February 2010)
| • | Sensor window enhancements (alternating row colors to aid visibility, on/off parameters show as indicators). |
| • | Graph window enhancements (better time axis labeling, ensure sensor labels are always visible). |
| • | Table window enhancements (2D graph allows drag selection, 2D graph selects rows and columns with Shift and Ctrl clicks) |
| • | Fixed PSP input increasing idle speed when PSP input used for other purposes. |
| • | Parameters window now scrolls. |
| • | Changed file association to work with Windows Vista / 7 security. |
| • | Allow capital I and D when editing notes. |
| • | Fixed 'Idle Speed Moving' table not showing temperature values in Celsius. |
| • | Added support for Windows Themes. |
| • | Added option to show 4 bar tables. |
| • | Added option for closed loop using wideband lambda input. |
V1.4.4.1 (26 October 2009)
| • | Fixed 1.4.4 boost control duty cycle table not saving/loading correctly. |
V1.4.4 (15 October 2009)
| • | Fixed nitrous 3 fuel & ignition load & save behaviour. |
V1.4.3 (7 August 2009)
| • | Added maximum speed for radiator fan override. |
| • | Added boost control solenoid frequency. |
| • | Added boost control direct duty cycle lookup. |
V1.4.2 (23 June 2009)
| • | Added MAP fuel overrun cutoff table. |
| • | Fixed boost control duty pressure value conversion when reading old calibrations. |
| • | Fixed nitrous3 maximum speed edit. |
| • | Fixed access violation when closing a datalog recording. |
V1.4.1 (11 March 2009)
| • | Added datalog and error code prompts. |
| • | Added option to disable the screen saver when datalogging. |
| • | Added ignition retard to strain gauge based full throttle shift. |
| • | Added the option to force the radiator fan on at a temperature. |
| • | Added maximum speed to nitrous conditions. |
| • | Fixed AC switch increasing idle speed when AC switch used for other purposes. |
V1.4.0 (20 November 2008)
| • | Added default graph templates. |
| • | Added display templates. |
| • | Added calibration compare function. |
| • | Added Winqual certified USB drivers. |
V1.3.9 (28 August 2008)
| • | Added 5000Hz and 8000Hz warning sounds to the display. |
| • | Fixed Voltage/Lambda conversion table behaviour when using lambda units. |
V1.3.8 (1 August 2008)
V1.3.7 (17 July 2008)
| • | Added right mouse button graph zoom. |
| • | Added overrun cutoff TPS and delay settings. |
| • | Added strain gauge full throttle shift input. |
| • | Fixed service connector light not flashing when service connector switch is jumpered. |
V1.3.6 (7 May 2008)
| • | Fixed wideband lambda setting entry |
V1.3.5 (1 May 2008)
| • | Fixed gear ratios changing to 0 when selected from list |
V1.3.4 (2 March 2008)
| • | Added boost control by rpm and gear. |
| • | Added 'Adjust' to parameter tables. |
| • | Added proportional table tracing. |
V1.3.3 (17 January 2008)
| • | Fixed injector duty cycle showing over 100% |
| • | Added scroll bars to Display window. |
V1.3.2 beta (20 December 2007)
| • | Enhanced display window. |
| • | Added check for inadvertent secondary table editing. |
| • | Fixed auto-tune adjustment when using TPS based table indexing. |
| • | Added RDX and Omnipower MAP sensors. |
V1.3.1 (6 November 2007)
| • | Added sensor value cursor display to graph. |
| • | Fixed open loop operation. |
V1.3.0 (25 October 2007)
| • | SManager now prompts to save unsaved datalogs when closing. |
V1.2.9 (August 2007)
| • | Added high water temperature ignition compensation table. |
| • | Added injector voltage compensation table. |
| • | Added additional IAB output. |
V1.2.8 (July 2007)
| • | Fixed some ignition retard settings not saving. |
V1.2.7 (27 April 2007)
| • | In the display window knock voltage has been changed to knock retard. |
| • | Fixed secondary tables cutting out under some circumstances. |
| • | Improved on board datalogging when memory is full and also externally datalogging. |
V1.2.6 (27 Mar 2007)
| • | Added Windows Vista USB driver install procedure. |
V1.2.5 (23 Mar 2007)
| • | Added the option to disable the VTEC spool error check. |
| • | Application is now digitally signed by Hondata. |
V1.2.4 (7 Mar 2007)
| • | Removed advance/retard nitrous ignition selection (retard is now entered as a negative number). |
| • | Fixed nitrous outputs not switching on under some circumstances. |
V1.2.3 (18 Jan 2007)
| • | Fixed high/low boost control not working correctly on low boost. |
| • | Added 'Test USB' function. |
| • | Added a VTEC output for non-VTEC ECUs. |
| • | Added Graph default display size in Settings;General. |
| • | In the Parameters window split 'IAT Compensation' and 'ECT Compensation' into 'Fuel Compensation' and 'Ignition Compensation'. |
| • | Clarified TPS range buttons (renamed from 'Set' to 'Read') |
V1.2.2 (12 Dec 2006)
| • | Added the ability to insert & delete table rpm and load indexes. |
V1.2.1 (4 Dec 2006)
| • | Added analog input 2 (pin B6). |
| • | Added nitrous output (pin A10). |
| • | Increased speed of launch limiter. |
V1.2.0 (8 Nov 2006)
| • | Fixed documentation of analog input (incorrectly documented as B6, actually is D12) |
| • | Remove minimum ignition timing limit |
| • | Prevent starting calibrations from being overwritten. |
| • | Datalog TPS when engine is not running. |
| • | Added kph/mph unit to the datalogging stop speed. |
| • | Added minimum and maximum water temperature to the nitrous outputs. |
V1.1.9 (16 Oct 2006)
| • | Added 12 supercharged and turbocharged calibrations. |
| • | Improved copy and paste between parameter tables. |
V1.1.8 (16 Sep 2006)
| • | Added third nitrous output. |
| • | Added FANC (radiator fan output) to nitrous outputs. |
| • | Added ALTC (alternator control output) to nitrous outputs. |
| • | Added 'Set Ignition Timing' function. |
| • | Added an auxiliary analog input. |
| • | Limit first and last water and air temperature compensation table index values. |
| • | Changed the positions of Parameter window tabs so they move around less. |
| • | Added open and closed loop ECT correction. |
| • | Added TPS recalibration. |
| • | Added a base calibration for ITBs. |
| • | Fixed USB datalogging when simultaneously on-board datalogging and datalogging memory is full |
V1.1.7 (14 Aug 2006)
| • | Added invalid file check when loading. |
| • | Improved calibration save/reload. |
V1.1.6 (10 Aug 2006)
| • | Added boost controller PWM output. |
| • | Added IAT ignition compensation. |
| • | Added ECT ignition compensation. |
V1.1.5 (19 May 2006)
| • | Allow KManager and SManager to connect to ECUs simultaneously |
| • | Improved importing s200 calibrations using a 5 bar MAP |
| • | Improved data integrity when downloading from the ECU which was uploaded with an old SManager version |
V1.1.4 (4 April 2006)
| • | Improved upload to recognize when ECU has been swapped. |
V1.1.3.0 (3 Mar 2006)
| • | Added P61 base calibration |
| • | In Datalog Download enabled the 'Delete All', so that the datalog memory can be reset. |
| • | Fixed Water and Dual Boost outputs so that unused conditions are not evaluated |
V1.1.2.0 (3 Feb 2006)
| • | Added the option to invert the purge valve output |
| • | Fixed 2d & 3d graphs not showing the table selection |
| • | Added ECT and IAT correction to datalogging |
| • | Fixed invert purge setting not being saved |
V1.1.1.0
| • | Fixed nitrous2 maximum rpm not saving |
V1.1.0.0
| • | Added adjustable voltage offset for the wideband lambda conversion. |
| • | Added additional MAP sensor details |
| • | Added additional sensor overlay features |
| • | Added fuel overrun cutoff rpm |
| • | Added increase / decrease current cell |
| • | Added additional water temperature correction tables |
V1.0.9.0
| • | Fixed ECT & nitrous fuel/ignition tables not saving/reloading |
V1.0.8.0
| • | Fixed help file not always displaying |
| • | Fixed clear lambda not clearing values from tables |
V1.0.7.0
| • | Fixed wideband configuration not saving 'custom' setting. |
| • | Added Techedge to the list of widebands. |
| • | Fixed sensor display minimum/maximum not being used for graphs. |
| • | Added lambda overlay and 'Clear Lambda Highlighting' menu option. |
V1.0.6.0
| • | Fixed injectors cutting out early for non-stock MAP sensors upon overrun conditions. |
V1.0.5.0
| • | Fixed purge valve operation so that it only operates above 2000 rpm and 10% throttle to prevent starting issues with OBDII vehicles. |
V1.0.4.0
| • | Fixed erratic boost cut and rev limit |
| • | Added lambda to display window |
| • | ELD can be used as the lambda input |
V1.0.3.0
| • | Fixed duty cycle display |
| • | Corrected table values in stock calibrations |
| • | Added an option in settings to set the temperature unit for the idle, water and air temperature compensation tables. |
| • | Fixed fuel pump and purge control valve sensor values. |
| • | Fixed lambda settings incorrectly saving. |
V1.0.2.0
| • | Fixed behaviour of table selection buttons & graph selection buttons. |
| • | Fixed boost cut when MIL |
V1.0.1.0
|